Removing Freezer Evaporator Temperature Limiter 2F2; Removing The Freezer Evaporator; Figure 030-49: Temperature Limiter 2F2 - Miele KF 18 Vi Series Technical Information

Technical Information
4.24

Removing Freezer Evaporator Temperature Limiter 2F2

1. Disconnect the appliance from the power supply.
2. Remove the freezer evaporator cover; see Section 030-4.20.
3. Remove the freezer drain channel/defrost heater plate. See Section 030-4.23.
4. Disconnect the temperature limiter electrical connection. See Figure
030-49, Item 1.
5. Remove the adhesive strips.
6. Cut the cable ties on the temperature limiter.
7. Remove the temperature limiter. See Figure 030-49, Item 2.

Figure 030-49: Temperature Limiter 2F2

4.25

Removing the Freezer Evaporator

1. Disconnect the appliance from the power supply.
2. Remove the freezer evaporator cover; see Section 030-4.20.
3. Remove the freezer drain channel/defrost heater plate. See Section 030-4.23.
Danger!
The evaporator has sharp edges that can cut you.
Warning!
Be careful when moving the evaporator after it has been released from the
holders, as it is only held in place by 2 tubes.
4. Unclip the evaporator from its retainers and remove. See Figure 030-50.
56
KF 18xx/19xx