Replacing A Magnetic Lock - Huawei FusionModule1000A20 Maintenance Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Maintenance Guide
Figure 6-18 Removing an exit button
Step 2 Install a new exit button and reconnect cables.
Step 3 Check whether the new exit button is working properly.
If the pre-fab. module door can be opened using the exit button, and the door opening event is
logged, the new exit button is working properly.
----End

6.3.6.3 Replacing a Magnetic Lock

Prerequisites
A spare magnetic lock of the same model is available and functional.
Impact on the System
None
Preparations
Tools: Phillips screwdriver, 3 mm hex key, step ladder (2 m)
Material: spare magnetic lock
Documents: none
Skill requirement: ELV engineer
Issue 03 (2022-12-15)
NO TE
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Parts Replacement
94