Replacing An Electronic Lock - Huawei FusionModule 1000B Maintenance Manual

FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Step 2 Install a new exit button and reconnect cables.
Step 3 Check whether the new exit button is working properly.
----End
Follow-up Procedure
Dispose of the removed exit button that is confirmed faulty.

6.3.13.3 Replacing an Electronic Lock

Prerequisites


Impact on the System
None
Preparations
Tools: Phillips screwdriver, 3 mm hex key, step ladder (2 m)
Materials: spare electronic lock
Documents required: none
Skill requirement: weak-current engineer
Procedure
Step 1 Use a Phillips screwdriver to loosen screws from the baffle plate of the electronic lock, as
shown by (1) in
Issue 02 (2017-01-10)
If the container door can be opened using the exit button, and the door opening event is recorded, the
new exit button is working properly.
An electronic lock needs to be replaced.
A spare electronic lock of the same model is available functions properly.
Figure 6-37.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
119