Table of Contents
Advertisement
FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Impact on the System
The operation of the monitoring system or devices may be interrupted.
Preparations
Tools: Phillips screwdriver, small-sized flat-head screwdriver, ESD gloves, marker
Materials: spare VCN500
Documents required: documents delivered with the VCN500
Skill requirement: weak-current engineer
Procedure
Step 1 Make a note of the cable connection and ports of the VCN500 to be replaced using the
marker.
Step 2 Shut down the VCN500, and disconnect the power plug.
Step 3 Remove all cables from the VCN500.
Step 4 Remove the faulty VCN500 using a Phillips screwdriver.
Step 5 Install a new VCN500.
1.
2.
Issue 02 (2017-01-10)
Push the VCN500 into the cabinet along the guide rails and gently press down the
buttons on the upper and lower mounting ears.
Figure 6-29 Placing a VCN500
Tighten the captive screws in the ears using a Phillips screwdriver to close the mounting
ear buttons.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
110
Advertisement
Table of Contents
