Table of Contents
Advertisement
FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Figure 6-46 Heat detector installation reference line
Step 7 Power on the fire alarm control panel after verifying that the new heat detector is properly
installed.
Step 8 Check whether the new heat detector is working properly.
----End
Follow-up Procedure
Dispose of the removed heat detector that is confirmed faulty.
6.4.3 Replacing the Gas Release Indicator (Standard)
Prerequisites
Impact on the System
The fire extinguishing system stops working during the replacement.
Preparations
Tools: Phillips screwdriver, protective gloves, step ladder, flat-head screwdriver
Materials: spare gas release indicator
Documents: fire extinguishing device layout diagram (standard)
Skill requirement: fire engineer
Issue 02 (2017-01-10)
If the red indicator blinks once every 6s, the heat detector is working properly.
A gas release indicator needs to be replaced.
A spare gas release indicator of the same model is available and functional.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
130
Advertisement
Table of Contents
