Huawei FusionModule 1000B Maintenance Manual page 52

Air-cooled it solution
Table of Contents

Advertisement

FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Item
Hydrogen
detection
system
Issue 02 (2017-01-10)
Method
Expected
Result
Press down the
The container
button after
door can be
removing the glass
opened.
cover of the
emergency door
release button.
Press the exit
The door can
button and open
be opened.
the door.
Swipe a card to
When an
open the door.
access card is
swiped, the
card reader
indicator
blinks green
once and then
returns to
steady red.
You will hear
a beep.
(Optional) Read
The container
your fingerprint to
door can be
open the door after
opened.
your fingerprint
has been collected
and assigned the
access permission.
Check the
The
mechanical lock.
mechanical
lock is free
from rust or
corrosion.
Check whether the
The hydrogen
hydrogen collector
collector is
has generated
working
alarms.
properly, and
no alarm is
generated.
Check the LCD of
The LCD
the hydrogen
displays the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Troubleshooting
when the
container
door is
closed.
If the container door cannot be
opened, replace by following
instructions in
an Emergency Door Release
1. Check whether the cable to the
exit button is properly
connected.
2. If the fault persists, replace by
following instructions in
Replacing an Exit
Swipe another access card and
observe the door status:
If the door can be opened by
another access card, the original
access card is damaged. Prepare
a new access card and assign
permission to the card.
If the door cannot be opened,
replace by following instructions
in
6.3.13.1 Replacing a Card
Reader.
If the container door cannot be
opened, replace by following
instructions in
Fingerprint
If the mechanical lock is rusty or
corroded and affects door opening,
contact Huawei technical support.
Troubleshoot by following
instructions in documents delivered
with the hydrogen collector.
1. Check that the AC input power
cable is normal.
4 Routine Maintenance
6.3.13.4 Replacing
Button.
6.3.13.2
Button.
6.3.13.5 Replacing a
Scanner.
44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusionmodule 1000

Table of Contents