Huawei FusionModule 1000B Maintenance Manual page 130

FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Figure 6-39 Removing the emergency door release button
Step 2 Install a new emergency door release button.
1.
2.
3.
4.
Figure 6-40 Installing the emergency door release button
Step 3 Check that the new emergency door release button is working properly.
----End
Follow-up Procedure
Dispose of the removed emergency door release button that is confirmed faulty.
Issue 02 (2017-01-10)
Connect cables.
Tighten screws on the base, as shown by (1) in
Install the glass panel, as shown by (2) and (3) in
Tighten screws, as shown by (4) in
Remove the cover of the emergency door release button using a Phillips screwdriver, press the button,
and rotate the door handle clockwise to open the container door. If the door can be opened, the
emergency door release button is working properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 6-40.
Figure 6-40.
Figure 6-40.
6 Parts Replacement
122