Table of Contents
Advertisement
FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
4.2 Routine Maintenance
Table 4-2 Routine maintenance checklist
Categ
ory
Manag
ement
system
Issue 02 (2017-01-10)
Item
Method
FusionMo
Choose Fault >
dule1000
Current Alarms
alarms
or Fault >
Historical
Alarms on the
home page of the
management
system.
Camera
Choose
images
Camera >
and
Camera >
coverage
Camera
Management,
right-click a
camera name on
the right side, and
view the video
images captured
by the camera.
Access
Check the door
controller
status list in the
communi
management
cation
system, and
status
verify whether
the access
controller is
working
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Expected
Troubleshooting
Result
No alarm is
See the iManager NetEco
displayed in the
product documents.
alarm
information
area.
Alarm short
Check whether the GSM
messages can be
modem is properly
received.
connected. If the GSM
modem is faulty, replace it
by following instructions in
6.3.5 Replacing a GSM
Modem.
The video
If no video image is
displayed:
images are
properly
1. Connect the camera
displayed.
cable again.
2. If the cable is correctly
connected, replace the
camera by following
instructions in
Replacing a
If the camera is normal but
no video image is
displayed:
1. Connect the VCN500
cable again.
2. If the cable is correctly
connected, replace the
camera by following
instructions in
Replacing a
The coverage of
If the camera coverage does
the camera is
not meet the monitoring
optimal.
requirement, adjust the
camera coverage.
After
If a door status icon is
configuring the
dimmed (unavailable),
access controller
check the access controller
in the
and network status.
management
system, you can
check the access
controller
4 Routine Maintenance
6.3.8
Camera.
6.3.9
VCN500.
21
Advertisement
Table of Contents
