9.6.2 Result Page
The result message is shown in the main frame after the "OK" button is pressed.
9.6.2.1 Image
The following figure shows the layout of the results page.
9.6.2.2 Setting Result
Items
"Restarting...
Restarting communication may
take a few minutes.
If you want to change the
settings, reconnect to the Web
Config."
"Setup failed."
"Cannot access the product
until processing is complete."
9.6.2.3 Button
Items
"Back to Main"
Figure 9-5 Image
Table 9-18 Setting Result
This message is shown when the settings are completed successfully.
This message is shown if setup fails.
This message is shown when the setting is unavailable because the product is
processing.
Table 9-19 Button
Changes to the main page.
Setting Result
Description
Description
30