Network; Network Basic; Top Page - Epson TM-P20II Reference Manual

10.3 Network

10.3.1 Network Basic

10.3.1.1 Top Page

10.3.1.1.1 Image
10.3.1.1.2 Setting Items
The following table shows the network setting items in Wi-Fi/Network Setup.
Items
"Device Name"
"Location"
"Note: The values in Device
Name and Location are
applied to multiple
network protocols."
"Obtain IP Address"
"IP Address Printing"
"Set using BOOTP"
"Set using Automatic
Private IP Addressing
Figure 10-6 Top Page
Table 10-17 Setting Items
Description
A text box is provided. The string must have 2 to 15
characters and contain
"A"~"Z", "a"~"z", "0"~"9" , and "-". (Spaces are not allowed.)
The leading character must be "A"~"Z" or "a"~"z". ("0"~"9"
and "-" are not allowed.)
The final character must be "A"~"Z" , "a"~"z" or "0"~"9". ("-"
is not allowed.)
A text box is provided. The string must be UTF-8
characters up to 127 bytes.
Notes for "Printer Name" and "Location"
Two radio buttons are provided to choose one of the
following:
"Auto" / "Manual"
Two radio buttons are provided to choose one of the
following:
"Enable" / " Disable "
Two radio buttons are provided to choose one of the
following:
"Enable" / "Disable"
Two radio buttons are provided to choose one of the
following:
Setting Items
Button
Condition
-
-
-
-
This item is displayed only for
models that support IP address
printing.
- If "Obtain IP Address" is
"Manual", this item is
grayed-out.
This item is not displayed on
CIJ.
- If "Obtain IP Address" is
"Manual", this item is
51