Ssl/Tls; Basic - Epson TM-P20II Reference Manual

10.4.4 SSL/TLS

In the SSL/TLS settings area, you can configure the settings related to the HTTP server the printer supports.

"Basic"

"Certificate"
10.4.4.1 Basic
10.4.4.1.1 Top Page
10.4.4.1.1.1 Image
The following figure shows the layout of the top page.
10.4.4.1.1.2 Setting Items
Items
"Encryption Strength"
"Redirect HTTP to HTTPS"
"TLS1.0"
"TLS1.1"
10.4.4.1.1.3 Button
Items
"Next"
Table 10-65 Sub menu
Sub menu
Figure 10-29 Top Page
Table 10-66 Setting Items
-Use the drop-down list to choose the strength of the encryption.
"80bit" / "112bit" / "128bit" / "192bit" / "256bit"
- You can change whether or not the printer allows redirecting HTTP to HTTPS.
"Enable" / "Disable"
Two radio buttons are provided to choose either of the following:
"Enable" / "Disable"
Two radio buttons are provided to choose either of the following:
"Enable" / "Disable"
Table 10-67 Button
There is the button at the bottom of the confirmation page.
Setting Items
Button
Description
Description
80