Result Page - Epson TM-P20II Reference Manual

"Command execution during offline"
"Power saving function for USB"
"Buzzer"
"Buzzer"
"When an erro occurs"
"When auto paper cut is operating"
"When paper end occurs"
"When battery level changed"
"When specified pulse 1 (2 pin) occurs"
"When specified pulse 2 (5 pin) occurs"
10.2.1.1.3 Button
The following table shows the buttons on the page.
"OK"
"Back"
If the Web Config recognizes an error in the input value after the "OK" button is pressed, the following reboot confirmation
pop-up is shown.
"Product will be restarted to apply the settings."

10.2.1.2 Result Page

The result message is shown on the main frame after the "OK" button is pressed.
User can select "Enable" / "Disable" by
radio button.
User can select "Enable" / "Disable" by
radio button.
Title
User can select "Optional Buzzer" /
"Disable" by radio button.
Use the drop-down list to select from the
following options:
"Off" / "Once" / "Continuous"
* "Continuous" is displayed only for
compatible models.
User can select "Off" / "Continuous" by
radio button.
User can select "Off" / "Once" by radio
button.
User can select "Off" / "Once" by radio
button.
User can select "Off" / "Once" by radio
button.
User can select "Off" / "Once" by radio
button.
Table 10-14 Button
Items
Table 10-15 Reboot Confirmation Pop-up
Items
Description
Button to start print settings. Press the button to display
the reboot confirmation pop-up
Button to move to the main page.
Description
Displayed when the "Set" button is pressed. Click the
"OK" button in the pop-up to move the Result Page.
Display only on models that
support Command
execution during offline
Display only on models that
support Power saving
function for USB
-
This item is displayed on
devices with a buzzer.
This item is displayed on
devices with a buzzer.
This item is displayed on
devices with a buzzer when
automatic paper cut is
performed.
This item is displayed on
devices with a buzzer when
paper end occurs.
This item is displayed on
devices with a buzzer when
the battery level changes.
This item is displayed on
devices with a buzzer when
specified pulse 1 (2 pin)
occurs.
This item is displayed on
devices with a buzzer when
specified pulse 2 (5 pin)
occurs.
49