10.2 Print
10.2.1 Print Settings
10.2.1.1 Top Page
10.2.1.1.1 Image
The following figure shows the layout of the top page.
10.2.1.1.2 Setting Items
Items
"Paper Reduction"
"Printing Control"
"Printing Speed"
"Print Density"
Figure 10-4 Image
Table 10-13 Setting Items
Description
Use the drop-down list to select from the
following options:
"Max" / "Recommendation" / "None"
Title
For models that support the maximum
printing speed "Level10"
Use the drop-down list to select from the
following options:
"Level1 (slow)" / "Level2" / "Level3" /
"Level4" / "Level5" / "Level6" / "Level7" /
"Level8" / "Level9" / "Level10 (fast)"
For models that support the maximum
printing speed "Level13"
Use the drop-down list to select from the
following options:
"Level1 (slow)" / "Level2" / "Level3" /
"Level4" / "Level5" / "Level6" / "Level7" /
"Level8" / "Level9" / "Level10" / "Level11" /
"Level12" / "Level13 (fast)"
For models that support the maximum
printing speed "Level17"
Use the drop-down list to select from the
following options:
"Level1 (slow)" / "Level2" / "Level3" /
"Level4" / "Level5" / "Level6" / "Level7" /
"Level8" / "Level9" / "Level10" / "Level11" /
"Level12" / "Level13" / "Level14" / "Level15"
/ "Level16" / "Level17 (fast)"
A value can be chosen using the
Drop-down list from the following options:
"70%" / "75%" / "80%" / "85%" / "90%" /
"95%" / "100%" / "105%" / "110%" / "115%"
/ "120%" / "125%" / "130%"
Setting Items
Button
Condition
Display only on models that
support paper reduction
-
Displayed only on models
that support print speed
Display only on models that
support Print Density
48