Network Security; Protocol; Top Page - Epson TM-P20II Reference Manual

10.4 Network Security

10.4.1 Protocol

10.4.1.1 Top Page

10.4.1.1.1 Image
10.4.1.1.2 Comment
"Note: If you need to change the Device Name and Bonjour Name used for each protocol ,
change the Device Name in the Network Settings.
If you need to change the Location used for each protocol, change it in the Network Settings."
10.4.1.1.3 Setting Items
Items
"Bonjour Settings"
"Use Bonjour"
"Bonjour Name"
"Bonjour Service Name"
"Location"
"Top Priority Protocol"
Figure 10-20 Top Page
Table 10-45 Comment
Comment
Table 10-46 Setting Items
Description
Title
Use the check box to choose whether or not to use
Bonjour.
Shows the bonjour name, consisting of the device
name and '.local'.
Use the edit box to set the bonjour service name.
The string must have up to 41 alphanumeric
characters (0x20 ~ 0x7E).
Shows the locations that use Bonjour protocol.
Use the drop-down list to choose the following
options.
"Port9100" / "IPP"
Comment
Setting Items
Button
Description
–Fixed Strings
Condition
-
-
Read only
Can be entered when "Use
Bonjour" is checked.
Read only
Only RAW (Port9100) and IPP
support products.
Can be entered, when "Use
Bonjour" is checked.
67