NEC Express5800 Series User Manual page 91

Chapter 2 Preparations

Adding an optional RAID controller (N8103-205/206/210)
When the optional RAID controller (N8103-205/206/210) is additionally installed, use the SATA cable
attached to the 3.5-type HDD cage (N8154-136) and RAID LED cable (K410-444(00)). At first, install the hard
disk drive into the leftmost slot viewing from the front side, and then install the remaining disks in order.
(N8103-205/206/210)
(The slot is PCI#4)
RAID LED cable (included with K410-444(00))
Flash backup unit control cable (provide with the K8103-209)
* N8103-209 does not support the N8103-205/210.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
(N8103-209)
（N8154-136）
（N8154-136）
91