Status; Operation:enable - HP E1343A User Manual

Subsystem Syntax

:OPERation:ENABle

Parameters
Comments
Example
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The subsystem reports the bit values of the Operation Status Register.

STATus

Enables the Status Register to set a bit after a bit is set to 1 by the Operation Status
Register.
STATus
:OPERation
number
:ENABle <
[:EVENt]?
STATus:OPERation:ENABle <
set a bit in the Status Register. For multiplexer modules, when bit 8 in the Operation
Status Register is set to 1, bit 7 in the Status Register is set to 1.
Parameter Name
number
< >
•
Setting Bit 7 of the Status Register:
7 of the Status Register to 1 after bit 8 of the Operation Status Register is set to
1.
•
Related Commands:
Enable the Status Register
STAT:OPER:ENAB 256
>
number > enables the Operation Status Register to
Parameter Type
numeric
STATus:OPERation:ENABle 256
[ROUTe:]SCAN
Enables bit 7 of the Status Register.
Relay Multiplexer Command Reference
STATus
Range of Values
1–32768
sets bit
63