Cpon; Ctype - HP E1343A User Manual

:CPON

Parameters
Comments
Example

:CTYPe?

Parameters
Comments
Example
66 Relay Multiplexer Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:CPON < number
(cards) in a switchbox.
Parameter Name
number
< >
•
Differences between
channels of a selected or all modules in a switchbox.
of all modules in a switchbox and also sets the trigger, etc. modes to the
power-on states.
Setting a Card #1 Module to its Power-on State
SYST:CPON 1
number
SYSTem:CTYPe? <
in a switchbox.
Parameter Name
< number >
•
16-Channel Relay Multiplexer Module Model Number:
The SYSTem:CTYPe? <
HEWLETT-PACKARD,E1343A,0,A.01.00
HEWLETT-PACKARD,E1344A,0,A.01.00
HEWLETT-PACKARD,E1345A,0,A.01.00
HEWLETT-PACKARD,E1347A,0,A.01.00
Note: The 0 after the module number is the serial number of the module
(always 0). A.01.00 is an example of the module revision code number.
Reading the Model Number of a Card #1 Module
SYST:CTYP? 1
| ALL> opens all channels of a selected or all modules
Parameter Type
numeric
and :
*RST CPON SYSTem:CPON
Sets module #1 to power-on state.
> returns the module (card) type of a selected module
Parameter Type
numeric
number > command returns:
Determines the model number.
Range of Values
1–99
only opens all
*RST opens all channels
Range of Values
1–99
(E1343A)
(E1344A)
(E1345A)
(E1347A)