:CONTinuous?
Example
[:IMMediate]
Comments
Example
56 Relay Multiplexer Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
INITiate:CONTinuous?
queries the scanning state. With continuous scanning
enabled, the command returns
command returns
OFF
.
Query Continuous Scanning State
INIT:CONT ON
INIT:CONT?
INITiate[:IMMediate] starts the scanning cycle and closes the first channel in the
channel list. Successive triggers from the source specified by the
command advances the scan through the channel list.
•
Starting the Scanning Cycle: The
scanning by closing the first channel in the channel list. A trigger advances the
scan through the channel list. An invalid channel list generates an error
(see the
[ROUTe:]SCAN
•
Stopping Scanning Cycles: See the
Enabling a Single Scan
SCAN (@100:115)
INIT
ON
. With continuous scanning disabled, the
Enables continuous scanning.
Query continuous scanning state.
INITiate[:IMMediate]
command).
command.
ABORt
Sets channel list.
Starts scanning cycle.
TRIGger:SOURce
command starts