Siemens SICHARGE UC Operating Instructions Manual page 23

LED display
The SICHARGE UC Dispenser can be equipped with an LED display. The LED display signals
different states depending on the software version.
NOTE
Other LED displays are possible
Upon customer request, the LED display/status may differ. In this case, the table below does
not apply.
Table 3-4 Status of the LED display
LED display
Green
Flashing green
Flashing blue
Red
Touch screen (HMI)
The SICHARGE UC Dispenser can be equipped with a central touch screen (HMI). The optional
SIPLUS HMI KTP700 Basic has a touch screen in 7" widescreen format. The large viewing angle
of the display makes it easier to recognize the operating information from different viewing
directions. To adapt the display to different lighting situations, the backlight of the display
can be dimmed over a wide range of brightness.
Charging cable cooling
The SICHARGE UC Dispenser can be equipped with a charging cable cooling. For variants with
more than 200 A charging current, the charging cable is cooled with a cooling liquid by the
charging cable cooling.
Lock system
To protect the SICHARGE UC Dispenser from unauthorized opening, the device door of the
SICHARGE UC Dispenser is equipped with a lock system. The door locks secure access to the
inside of the SICHARGE UC Dispenser. You need a special door key to open the device door.
The door key is included in the delivery.
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
Status
Ready for charging
Establishing communica­
tion, starting charging
Charging active
Fault active
3.3 Structure of a SICHARGE UC Dispenser
Description
Charging is active.
EV is connected, charging unit is in communication
with EV and is trying to start a charging process.
Charging active. The flashing frequency reflects the
charging level of the EV in %.
A fault is active. Charging is not possible.
Description
23