Restarting The Charging Process After An Alarm - Siemens SICHARGE UC Operating Instructions Manual

Operation
8.7 Operating the Service menu
8.7.3

Restarting the charging process after an alarm

When the SICHARGE UC Dispenser triggers an alarm, the SICHARGE UC Dispenser
automatically switches off the power supply of the charging cable. The
SICHARGE UC Dispenser does not charge during the alarm state. To charge an electric vehicle
again, you need to first deactivate the active alarm.
NOTE
First eliminate the cause of the alarm
Only trained personnel may operate the SICHARGE UC Dispenser and reset alarms.
When you press the "Acknowledge alarm" button when deactivating an alarm, the controller
of the SICHARGE UC Dispenser checks the cause of the alarm again. As long as the cause of
the alarm is still present, the SICHARGE UC Dispenser does not deactivate the alarm.
• First eliminate the cause of the alarm.
• Then deactivate the alarm.
Requirements
• You have opened the Options menu.
• You have pressed the "Alarm" button in the Options menu.
82
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE