Maintenance Plan; Servicing The Charging Station; Cleaning The Touch Screen - Siemens SICHARGE UC Operating Instructions Manual

10.2

Maintenance plan

The following maintenance measures and service measures are necessary to maintain the
functionality and operational safety of the Dispenser.
Timing of checks
After commissioning, carry out the checks according to the "Preventive maintenance
checklist" but, at a minimum, at the following intervals:
• 2 months after commissioning
• 6 months after commissioning
• 12 months after commissioning
After the first year, carry out the checks every 12 months or at shorter intervals if necessary
due to the ambient conditions (e.g. high dust exposure).
Check Dispenser
Follow the steps outlined in the checklist in the following document "Preventive Maintenance
Checklist (https://support.industry.siemens.com/cs/ww/en/view/109815371)".
10.3

Servicing the charging station

10.3.1

Cleaning the touch screen

The touch screen is designed for low-maintenance operation. Clean the touch screen
regularly to ensure that the touch screen is in perfect condition.
Electric shock due to water ingress
Water entering the SICHARGE UC Dispenser can damage the SICHARGE UC Dispenser. If the
unit is damaged, dangerous voltages may be present on the cabinet or exposed
components, which can cause serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a pressure washer, steam cleaner or water jet to clean the
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the touch screen of the SICHARGE UC Dispenser.
• Therefore, do not use any solvents.
• Also, never use aggressive or abrasive cleaning agents.
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
WARNING
SICHARGE UC Dispenser.
WARNING
Maintenance and service
10.3 Servicing the charging station
103