Steps
1. Align the hard drive to the side of the hard drive bracket.
2. Pull the other end of the hard drive bracket to insert the pins on the bracket into the slot on the hard drive.
3. Insert the hard drive into the hard drive bracket until it clicks into place.
Next steps
1. Install the
2.5-inch primary hard drive
2. Install the
side
cover.
3. Follow the procedure in
Installing the secondary 2.5-inch hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 2.5-inch hard drive and provides a visual representation of the installation
procedure.
or
2.5-inch secondary hard
after working inside your
drive.
computer.
Removing and installing Customer Replaceable Units (CRUs)
49