Installing The Speaker; Coin-Cell Battery; Removing The Coin-Cell Battery - Dell D31M Owner's Manual

Installing the speaker

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the speaker and provides a visual representation of the installation procedure.
Steps
1. Press the tab on the speaker and slide the speaker into the slot on the chassis until it snaps into place.
2. Press down on the speaker to secure the speaker with the tab on the chassis.
3. Route the speaker cable through the routing guide on the chassis.
4. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Coin-cell battery

Removing the coin-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the coin-cell battery and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs) 73