Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the graphics card and provides a visual representation of the installation procedure.
Steps
1. Align the graphics card with the PCIe card connector on the system board.
2. Using the alignment post, connect the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Rotate to close the PCIe door that secures the graphics card.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
After working inside your
computer.
68
Removing and installing Customer Replaceable Units (CRUs)