Internal Speaker; Removing The Speaker - Dell D31M Owner's Manual

4. Close the PCIe door.
5. Align the triangles on the cable holder with the triangles on the chassis.
6. Place the cable holder on the computer chassis until it clicks to place.
7. Route the power cable through the retention tab on the cable holder.
8. Route the power cable, through the slot on the cable holder and connect it to the connector on the graphics card.
Next steps
1. Install the side cover.
2. Follow the procedure in

Internal speaker

Removing the speaker

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the speaker and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the connector on the system board.
2. Remove the speaker cable from the routing guides on the chassis.
3. Press the tab, lift and slide the speaker along with the cable from the slot on the chassis.
72 Removing and installing Customer Replaceable Units (CRUs)
after working inside your
Before working inside your
computer.
computer.