Steps
1. Insert the hard-drive assembly into the slot on the computer until it clicks into place.
2. Connect the data and power cables to the connectors on the hard drive.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
after working inside your
computer.
Installing the primary 2.5-inch hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 2.5-inch hard drive and provides a visual representation of the installation
procedure.
50
Removing and installing Customer Replaceable Units (CRUs)