Appropriate Place For Installation; Power Connection - Beko 71261 AL Owner's Manual

Right place for installation
Do not place the product on an
improper surface or at a point with risk
of falling. This may result in death,
serious injuries or damage to the
product.
Install the product on a secure and flat
surface in environments with no risk of
freezing.
Ensure that the installation area shall
not deteriorate in the course of time.
Do not install the product on a location
where noise from the outdoor unit and
hot air may disturb or even damage
the neighbours.
Do not install the product on a location
where it will be exposed to direct wind
blowing from the sea (salt spray).
The indoor unit shall not be mounted
on objects, such as LCD, TV unit that
may be damaged in case of water
leakage.

Power connection

Plug the product in a grounded electrical
installation protected by an automatic
fuse conforming to the values specified in
the "Technical Specifications" chart. Our
company shall not be responsible for the
damages that shall be incurred due to
using the product without grounding
according to local regulations.
The connection must conform to national
regulations.
The fuse of the product shall be easily
accessible after installation.
Voltage and allowed automatic fuse
protection are specified on the "Technical
Specifications" section. If the amperage
value of the automatic fuse in your
household does not match the values
indicated in the "Technical Specifications"
chart, have an automatic fuse with proper
amperage value installed by a qualified
electrician.
The specified voltage must match your
mains voltage.
Do not use extension or multi sockets in
power connection. Replace the cord if it
is scratched, peeled, worn or broken.
Failure to comply with this instruction may
cause electric shock or damage to the
product.
Do not use a damaged power cord,
plug or an outlet. Failure to comply
with this instruction may cause fire or
electrocution.
The contact clearance of the main fuse
and switches shall be at least 3 mm.
Do not connect the grounding wire to
gas pipes, lightning rod or grounding
connection of a phone. Failure to
comply with this instruction may cause
electric shock or damage to the
product.
Damaged power cord of the product
shall be replaced by Authorized
Service.
If the product is malfunctioning, it must
not be operated without being
repaired! There is a risk of electrocu-
tion!
12