Fan Speed Adjustment; Temperature Adjustment / Room Temperature Control; Directing The Vertical Air Flow - Beko 71261 AL Owner's Manual

You can change the desired fan
3.
speed. See "Fan speed adjustment"
In this mode, the air conditioner
outdoor unit compressor does not
operate.
It sends the indoor air back to the
outside environment. Circulates the air.

Fan speed adjustment

Press the " " and " " buttons to set the
desired air flow rate.
Symbol y
Low fan speed
Medium-Low fan speed
Medium fan speed
High-Medium fan speed
High fan speed
Chaos Swing (Natural air
current effect)
While in Chaos Svving mode, the fan
speed automatically switches between
medium or low fan speed according to
the ambient temperature.
The options may vary depending on
the product function or may not work.
Temperature adjustment /
Room temperature control
You can adjust the desired room
1.
temperature easily.Press the " "
buttons to adjust your desired room
temperature.
: Each time you press the button the
temperature will increase by 1° C.
: Each time you press the button the
temperature will decrease by 1° C.
Cooling mode:
If the set temperature is higher than
the room temperature, the unit will not
operate in cooling mode. Decrease
the set temperature value.
Definition
Heating mode:
If the set temperature is lower than the
room temperature, the unit will not
operate in heating mode. Increase the
set temperature value.
Directing the vertical air flow
To operate the product, press the
" " button.
Press Vertical (
The symbol " " will appear on the
display and the horizontal
start to move to the set
range.
Controller display
Symbol
1. Level
2. Level
3. Level
4. Level
5. Level
6. Level
Free
Horizontal
automatically between 1. nd 6. level.
Always use the remote control to
adjust the direction of the horizontal
. Manual adjustment of the
horizontal
product.
The horizontal
when the air conditioner is turned off.
Following the free
pressing the "
the vertical
position.
19
) to select the
Definition
angle
angle
angle
angle
angle
angle
movement
moves
may damage the
will also close
movement,
" button ( ) lets
remain in its last
will
angle