Auto Power On/Off Function - Beko 71261 AL Owner's Manual

Table of Contents

Advertisement

Controller display
4.
To
press the "
until "
" appears, then press the
"
" button ( (
"
" option.
5.
Repeat steps 1,2,3 to change the auto
power on time again.
When the
set, pressing any key except the Up
and Down arrow keys or the confirma
keys exits the
Clock format is 24-hour clock. It is very
important to set the time correctly as
the program setting you will adjust the
air conditioner with will be based on the
clock of the remote control.
The
-On Function is
operable when the controller is off.
Timer-Off (
To turn off the air conditioner automatical-
ly, you can set the program by performing
the following operations.
Example: Let the air conditioner switch off
at 10:00 in the morning.
1. Press the "
until the
"
" symbol starts to flash.
On,
and exit from these are available as a
combination under the timer button.
Sequencing is as shown in the table.
Controller display
A/C indicator
" button ( ( ( ) )
) after exiting the
-On Function is
-On Function.
)
" button (
Off, Cancel
On
Off
Cancel
Exit
Set the clock using the
(Each time you press the button it will
change in units of 10 min.) If the button
is pressed and held down for 3
seconds, the 10 minute transitions will
be run faster.)
Controller display
Press the "
setting the clock. When the setting is
complete, the "
on the remote control and the current
time will be displayed.
Controller display
4.
To cancel the
press the "
until "
"
" button (
"
" option.
Repeat steps 1,2,3 to change the auto
5.
power on time again. When the
Function is set pressing any key
)
the Up and
Down arrow keys or the confirmation
keys exits the
Clock format is 24-hour clock.
It is very important to set the time
correctly as the program setting you
will adjust the air conditioner with will
be based on the clock of the remote
control.
The
operable when the controller is off.
24
"
button to finish
" symbol will appear
A/C indicator
function,
" button (
" appears, then press the
) after exiting the
-Off Function.
Off Function is
buttons.
)
-Off

Advertisement

Table of Contents
loading

Table of Contents