Auto-Operation Mode; Dehumidifying Mode; Fan Mode - Beko 71261 AL Owner's Manual

What does
The A/C brings the temperature setting
to 30°C in 30 min. at a very high fan
speed while operating in heating mode,
allowing the room temperature to
increase rapidly.
The rapid heating function is used to T
quickly increase room temperature,
especially on cold winter days. e
The rapid heating function is not used in T
c cooling mode.
T This function may not be included or not
work on some products.

Auto-operation mode (

p p
Depending on the set temperature on
the controller, the air conditioner
operates automatically in heating or
cooling mode. The air conditioner is
used to automatically control the fan
speed and temperature by detecting the
room temperature.
To operate the product, press the "
1.
button.
2.
Press the "Mode" button
runs in auotomatic mode. The "
symbol and "Automatic" text will be
displayed.
Controller display
Press the " " buttons until you reach the "
3.
desired set temperature. Each time you t
press the button, the set room tempera-
ture will increase or decrease by 1° C.
- The temperature range is between 18°
and 30° C. You can change the desired
fan speed as well. See "Fan speed
adjustment"
Set the temperature value on the
remote control display to a value above
or below the room temperature.
When the air conditioner is in heating
mode, adjust the horizontal
angle to the lowest position for more
efficient heating.
When the air conditioner is in heating
mode, the indoor fan continues to
operate for a while after the ambient
temperature has reached the desired
value. At this point, the air blown by the
air conditioner may feel warm.
heating do?
( ) )
until the unit
A/C indicator
If you feel the indoor temperature is
getting lower, we recommend that you
set the temperature on the controller to
a higher value.

Dehumidifying mode ( )

In this mode, excess moisture is
absorbed from high humidity
environments and mold growth is
prevented. This mode automatically
adjusts the ambient temperature to keep
the humidity at the optimum point during
operation.
1.
To operate the product, press the "
button.
2.
Press the " " button until the unit runs
in dehumidifying mode. The " " symbol
and "Dehumidifying" text will be
displayed.
Controller display
" "
"
In this mode, the air conditioner detects
the room temperature and adjusts to the
best condition to remove moisture
based on the room temperature. The set
temperature is not displayed on the
remote control in this case.
During the hygienic dehumidification g g
function, it is automatically adjusted
according to the algorithm that meets
the current room temperature and keeps
the room condition healthy and
comfortable even during seasons with
high humidity. g g
The indications on the A/C display may
differ.

Fan Mode (

It circulates the air without changing
the room temperature.
To operate the product, press the
"
Press the "Mode" button until the
unit runs in fan mode.
symbol and "Fan" text will be
displayed.
Controller display
18
A/C indicator
g g
g g g g
y
)
" button.
A/C INDICATOR
"
" "
The " "