Table of Contents
Advertisement
C
The Ionfresh air purge function can be operated
while the air conditioner is off, during this operation
the fan speed will be at the lowest level.
Hygiene Function (Hygiene)
It kills 99.99% of Escherichia Coli, Staphylococcus
Aureus microorganisms, and 99.99% of Bovine
Coronavirus and Influenza A Virus (H1N1)
microorganisms on the indoor unit heat exchanger
surface when it is operated at a temperature of
56ºC and above for 15 minutes in the hygiene
function.
1.
To start the hygiene function until the
«Hygiene» symbol appears on the display.
Press the «Hygiene/Ion» (
C
The hygiene function is combined with the Ionizer
air purification function. The order is as in the table.
Controller Display
Hijyen
2.
When the hygiene function is active, the HJ
symbol will appear on the display of your air
conditioner.
3.
Press the «Hygiene/Ion» button (
product remote control to cancel the function.
C
The hygiene function can be used while your air
conditioner is running. This function works for
15 to 30 minutes depending on the ambient
conditions.
C
Dirty or clogged air filter affects the hygiene
function. For this reason, clean your air filter
at the intervals recommended in your user
manual.
C
The hygiene function will operate in the following
ambient temperature conditions. Outside of these
conditions, when the hygiene function is pressed,
the HJ symbol will flash on the air conditioner
display and you will hear 3 beeps from your air
conditioner and your product will not enter the
hygiene function.
Interior
Outdoor
C
Hygiene and Ion air purification (ionizer) functions
cannot be operated at the same time.
C
If the required temperature cannot be reached
by the heat exchanger for 30 minutes, your air
conditioner will automatically exit the hygiene
function. In this case, the HJ symbol will flash
on the air conditioner indicator and you will
hear 2 beeps from your air conditioner.
) button.
Hygiene
Hygiene off / Ionizer on
Ionizerd off
) on the
C
When the hygiene function is activated, the
"Hygiene" icons on the remote will light for 10
seconds and then turn off. All keys except
Hygiene/Ion, Heat, Cool, Mode and On/Off
(output conditions) cannot be used during this
time. When any of these keys are activated,
the function turns off automatically.
C
Indicator On/Off function can be used 10
seconds after the hygiene function is activated.
C
Functions that are activated by the user during
the hygiene function are active and that are
outside the output conditions are detected by
the air conditioner and are activated after the
function ends.
Economy (
It saves energy during cooling process.
1. Step: In cooling mode, the power
consumption
rated power.
2. Step: Power consumption in cooling
mode is 40% lower than rated power
3. Step: Power consumption in cooling
mode is 60% lower than rated power
1.
To operate the product, press the "
button.
2.
Press the "Cool" button (
cooling mode.
3.
Set the A/C to a desired temperature. See
"Temperature adjustment"
4.
Press the "Ekonomi" button (
1.step thle
energy-control cooling function.
Controller display
Controller display
1. Step Inlet
5.
To start
2. Step
cooling function press the "Ekononmi"
button (
) again.
.
To start
3. Step
cooling function press the "Ekononmi"
button (
) again.
2
)
is 20% lower than the
) to switch to
) to start
Controller display
2. Step Inlet
3. Step Inlet
the energy control
the energy control
"
Advertisement
Table of Contents
Troubleshooting
