Directing The Horizontal Air Flow; One -Touch Soft Air; Information Display; Display On/Off - Beko 71261 AL Owner's Manual

Directing The Horizontal Air Flow

To operate the product, press the "
button.
Press the " " button to select the fan
angle. The "
appear on the display and the
button will start to move to the set
angle range.
Controller display
Symbol
1. Level
2. Level
3. Level
4. Level
5. Level
Automatically controls the y y
angle between 1. and 3. level.
Automatically controls the
angle between 3. and 5. level.
Free
moves automatically
between 1. and 5. level.
Always use the remote control to
adjust the direction of the vertical
. Manual adjustment of the
vertical
product.
This function may not be included or
not work on some products
Following the free g g
pressing the " g
lets the
its last position.
One-touch soft air (
When the " " button is pressed, it
easily adjusts the air flow at two
different angles to deflect the directly g g
incoming wind.
Controller display
" symbol will
Definition
angle
angle
angle
angle
angle
movement:
may damage the
movement,
" button ( )
remain in
)
Controller display
Info Display (Instantaneous
Power Consumption and Ambient
"
Temperature Display (
If the "Confirm" button (
and hold for 3 seconds, the instanta-
neous energy consumption (kW) will be
displayed on the indoor unit display and
the actual room temperature will be
displayed on the control screen.
The unit of the 1.2 value shown on the
A/C display as an example, is "kW",
and equivalent to 1200 Watt.
Depending on the location of the
wireless remote control in the room,
the room temperature value may vary.

Display On/Off (

Press and hold the "Sleep" button (
sec. to switch the air conditioning indicator
on and off.
al
This function may not be supported
depending on the model.

lonfresh air cleaning function

( )
It removes microscopic particles by ionizing
the environment.
To start lonfresh air cleaning function
1.
press the "Ion/Cleaning" button (
The Ionfresh air cleaning function is
combined with the Ionizer air cleaning.
Sequencing is as shown in the table.
Controller display
2. To switch off the Ionfresh air purge function,
press the Ion/Cleaning button (
"lonizer" symbol in the control display goes out.
20
)
( ) is pressed
A/C indicator
.
)
Ionizer
Auto-clean
Turn off Ionizer
Turn off Auto-clean
) until the
) for 3
).