Control Panel - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide

Control panel

A
P button (power button)
Turns the power on and off.
B
P light (power light)
The printer's operational status is indicated by a lit or
flashing light.
On : The power is on.
Flashing : The printer is receiving data or
performing head cleaning or other
operations during shut-down.
Off : The power is off.
C
(button (Load/Remove Paper button)
Pressing this button displays the Load/Remove
Paper menu. Instructions for loading or removing
the paper can be displayed by highlighting either
Remove Paper or the type of paper currently loaded
and then pressing the Z button. Follow the
on-screen instructions to load or remove the paper.
Introduction
D
Display
Displays the printer's status, menus, error messages,
and so on. U
page 11
E
Menu button
Displays the menu for the tab currently selected in
the display. U
page 46
F
y button (back button)
If menus are displayed, pressing this button takes
you up one level in the menu hierarchy. U
Operations" on page 46
G
l/r buttons (left and right arrow buttons)
❏
Use these buttons to select tabs. The selected tab is
highlighted and the content of the info display area is
updated for the selected tab.
"Understanding the Display" on page 11
U
❏
If menus are displayed, these buttons can be used to
position the cursor or delete characters when entering
text for items such as Setting Name or IP Address.
H
u/d buttons (up and down buttons)
When menus are displayed, these buttons can be
used to highlight items or options. U
Operations" on page 46
I
Z button
❏
Displays the menu for the tab currently selected in the
display.
"Using the Control Panel Menu" on page 46
U
❏
When menus are displayed and an item is highlighted,
pressing this button displays the sub-menu for the
highlighted item.
❏
If pressed while a parameter is selected from the
Menu, the parameter is set or executed.
J
[ ] button
Displays the information display area for the B tab.
K
" button (maintenance button)
Displays the Maintenance menu, which is used for
nozzle checks and head cleaning.
"Clearing clogged nozzles" on page 81
U
10
"Understanding the Display" on
"Using the Control Panel Menu" on
"Menu
"Menu