Specifications Table - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide

Specifications Table

Printer Specifications
Printing method On-demand ink jet
Nozzle configura- 360 nozzles x 2 rows x 4 colors
tion
(Black
Resolution (maxi- 720 × 1440 dpi
mum)
Control code ESC/P raster (undisclosed
command)
Paper feed method Friction feed
Built-in memory 512 MB for Main
128 MB for Network
Interface Hi-Speed USB-Compatible with the
USB 2.0 Specification.
100Base-TX/1000Base-T
Rated voltage AC100-240V
Rated frequency 50-60 Hz
Rated current 1.0 to 0.5 A
Power consumption
In use Approximately 65 W
Sleep mode 3.0 W or less
Power off 0.4 W or less
Temperature and humidity (without condensation)
Recommended 15 to 25˚C, 40 to 60%
In use 15 to 35˚C, 20 to 80%
In storage -20 to 60˚C, 5 to 85%
(Before (Within 120 hours at 60 ˚C, within a
unpacking) month at 40 ˚C)
In storage -20 to 40˚C, 5 to 85%
(Before charging (Within a month at 40 ˚C)
ink)
Appendix
*1
, Cyan, Magenta, Yellow)
*2
Printer Specifications
Temperature and humidity range
Gray area: Printing
Cross-hatch lines: Recommended
Dimension
*3
Weight
*1 High Density Black or Black
*2 Use a shielded twisted pair cable (category 5e or better).
*3 Not including ink or the auto take-up reel unit.
Ink Specifications
Type
Sublimation dye
ink
Use by date
Print quality
guarantee expiry
Storage
temperature
Capacity
Note:
To ensure the colors you want to print, maintain a
constant room temperature of 15 to 25˚C.
c
Important:
Use this printer at altitudes below 2000 m.
106
(W) 1608 x (D) 914 x (H) 1128 mm
93 kg
Dedicated ink pack
High Density Black, Black, Cyan,
Magenta, Yellow
Date printed on the ink pack (stored
at normal temperatures)
25 days (from the day the ink tank
was refilled with an ink pack)
5 to 35˚C
1100 ml