Feeding Or Ejecting Problems - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide
The reverse side of the printed paper
is soiled.
Select On for Paper Size Check in the menus.
o
Although under normal circumstances printing stops
if the print image is wider than the paper, the printer
may print beyond the edges of the paper when Off is
set for Paper Size Check in the Setup menu. If it prints
beyond the edges of the paper, the inside of the
printer becomes dirty with ink.
Changed settings are reflected when the paper is
reloaded.
"Setup menu" on page 54
U
Is ink dry on the printed surface?
o
Depending on the printing density and paper type,
the ink may take a while to dry. Do not stack the paper
until the printed surface is dry.

Feeding or ejecting problems

Unable to feed or eject paper.
Is the paper loaded in the correct position?
o
See the following for the correct paper loading
positions.
"Loading Roll Paper" on page 25
U
If the paper is loaded correctly, check the condition of
the paper that you are using.
Is the paper wrinkled or creased?
o
Do not use old paper or paper with creases in it.
Always use new paper.
Is the paper too thick or too thin?
o
Check that the paper specifications are compatible
with this printer. For information about the paper
types and appropriate settings, see the
documentation supplied with the paper, or contact
the dealer of the paper or the manufacturer of the RIP.
Problem Solver
Is paper jammed in the printer?
o
Open the printer cover of the printer and check that
there are no paper jams or foreign objects in the
printer. If paper is jammed, see "Paper jams" below
and clear the jammed paper.
Is the paper suction too strong?
o
If you continue to have problems with ejected paper,
try lowering the Paper Suction (the amount of suction
used to keep the paper on the paper feed path). U
"Paper menu" on page 51
Roll paper jam
To remove jammed paper, follow the steps below:
A
Turn off the printer.
B
Turn the printer on.
After a pause, the message Follow instructions
on screen to clear jammed paper.is displayed on
the screen.
C
Cut the top portion of any torn or creased paper
above the paper feed slot using a commercially
available cutter.
D
Press the Z button.
96