Epson SureColor SC-F6300 Series User Manual page 58

SC-F6300 Series User's Guide
Item
Forced Charge
Select Target Ink Tank
Restore Settings
Printer Status
Firmware Version
Option Status
Carriage passes
Network Setup
IP Address Setting
Print Status Sheet
Restore Settings
Power Settings
Using the Control Panel Menu
Parameter Explanation
Do this if there is a discrepancy with the indicator when only 1 level
remains (refer to the following illustration) when it is time to refill the
ink while continuing to use a reserved chip.
Indicator
Ink tank
Set a new chip unit on the slider of the target ink tank and mount it on
the printer in advance, and then do this setting. Selecting the target
ink tank in this setting and pressing the Z button cancels the
charge, and the printer is freshly charged from the chip unit that was
mounted in advance. A cancelled charge cannot be recharged or
returned to its original state.
This setting cannot be done in a state in which there are more than 2
levels on the indicator.
Yes
Select Yes to restore printer settings to their default values.
No
xxxxxxx,x.xx,xxx You can see the firmware version.
x
XXXXXXXXXX Displays the name of the optional device connected to this printer.
XXXXXXXXXX Displays the current number of carriage passes.
* Select whether IP addresses are obtained automatically using DHCP
Auto
(Auto) or manually (Panel). Set the IP address, Subnet Mask, and
Default Gateway on the Panel. Contact your system administrator
Panel
for detailed information.
Press the Z button to print a list of the network settings. Use this
information for a complete overview of network settings.
Yes Select Yes to restore network settings to their default values.
No
58