Epson SureColor SC-F6300 Series User Manual page 56

SC-F6300 Series User's Guide
Item
Advanced Settings
Remove Skew
Drying Time Per Page
Paper Size Check
Paper Skew Check
Print Nozzle Pattern
Periodical Cleaning
Light
*
Medium
Heavy
Cleaning Cycle
Using the Control Panel Menu
Parameter Explanation
* Select whether to enable (On) or disable (Off) paper skew reduction.
On
Off
* Specify how long the printer pauses to allow the ink to dry after
Off
printing each page. You can select Off or values between 0.1 and 60
minutes. Depending on the ink density or paper type, the ink may
0.1 to 60
take a while to dry. If the ink blurs on the paper, set a longer time for
minutes
drying the ink.
The longer the drying time, the more time required for printing.
* Select whether or not (On/Off) the printer automatically detects the
On
paper width when the paper is loaded. We generally recommend to
operate with this setting set to On.
Off
Try setting Off if a paper setting error is displayed when the paper is
correctly loaded. Note, however, that the printer may print outside
the paper when Off is selected. If it prints beyond the edges of the
paper, the inside of the printer becomes dirty with ink.
Changed settings are reflected when the paper is reloaded.
*
If On is selected, an error will be displayed in the control panel and
On
printing will stop if the paper is skewed; select Off to disable this
Off feature. On is recommended in most circumstances as skewed
paper may cause the printer to jam.
*
Select how frequently the printer prints a nozzle test pattern. Print
Off
Nozzle Pattern is not performed when Off is selected. To print a test
pattern at the top of every 1 to 10 pages, select an option between 1
1 to 10 pages
and 10. When printing is complete, you can visually inspect the
pattern to determine whether there may be faint or missing colors in
the preceding or following printout.
Off, 1 to 240 Set the strength and time to perform periodic head cleaning.
hours
Periodical Cleaning is not performed when Off is selected. If a value
between 1 and 240 hours is selected, auto head cleaning will be
performed after the specified number of hours. If printing is in
progress when the specified time has elapsed, Periodical Cleaning
will only be performed after printing is complete.
The following reset the timer:
❏
Choosing a setting time for this item.
❏
When head cleaning was performed using All Nozzles at a
strength that is the same as or higher than the setting selected
for this setting.
Note that even when Off is selected for Periodical Cleaning, the
printer will automatically clean the print head at a fixed interval after
printing to keep the nozzle from clogging.
* Choose the frequency with which the printer performs head
Off
cleaning: never (Off) or once every 1 to 10 pages. Cleaning Cycle is
not performed when Off is selected. Select 1 to 10 to perform head
1 to 10 pages
cleaning automatically before the specified page is printed.
56