Epson SureColor SC-F6300 Series User Manual page 75

SC-F6300 Series User's Guide
When the amount of ink remaining is above the
top edge of the metal plate
You cannot empty the entire new ink pack into
the ink tank. Continue use until the ink level
reaches the top edge of the metal plate.
When the amount of ink remaining is below the
top of the hole
When the amount of ink remaining drops below
the top of the hole, the amount remaining may be
less than the minimum value and printing may
stop. Refill the ink right away.
c
Important:
When the remaining ink is above the top edge
of the metal plate and a message appears
stating Refill Ink Tank, it is time to replace the
ink tank. Replace the ink tanks. Replacements
and repairs will be provided for a fee.
During replacements and repairs, the ink in
the ink tank is discarded. This is necessary
because fine dirt, dust and other foreign bodies
mixed the ink in the ink tank cause the ink
tank to malfunction.
The ink tank replacement interval depends on
the usage environment and conditions.
Contact your dealer or Epson Support.
B
Open the side cover.
Maintenance
C
Hook a finger into the indentation on top of
slider and pull it straight out.
c
Important:
Do not tilt the slider. Dropping the chip unit
may damage it.
D
Remove the chip unit from the slider.
75