Sanyo CAR-5040 Series User Manual page 27

Gently press the CPU socket lever handle down and away from the socket with your finger. Then completely lift
the CPU socket lever and the metal load plate will be lifted as well.
Remove the CPU socket cover as shown. Hold your index finger down on the rear grip of the socket cover and
use your thumb to lift up the front edge (next to the "REMOVE" mark) and then remove the cover. (DO NOT
touch socket contacts. To protect the CPU socket, always replace the protective socket cover when the CPU is
not installed.)
Pin One Corrner of
the CPU Socket
Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one
corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and gently insert
the CPU into position.
CAR-5040 Series User's Manual
All manuals and user guides at all-guides.com
1
Step1
Setp2
Step3
2
頁 27