3. Mark the movable drive face and the fixed drive face
for installing purposes; then remove the nut holding
the movable drive face onto the crankshaft.
4. Remove the movable drive face and spacer. Account
for the movable drive face rollers and outer drive
face cover.
60
KC142A
5. Using a 6 mm cap screw threaded into the fixed
driven face, spread the driven pulley by turning the
cap screw clockwise; then remove the V-belt.
MD1033
6. Remove the fixed drive face.
7. Remove the nut holding the driven pulley assembly;
MD1035
then remove the driven pulley assembly.
MD1034
MD1036
KC132
MD1094
MD1068