Saving The Tx Equalizer Settings; Reading The Tx Equalizer Settings - Kenwood TS-890S Instruction Manual

• To copy after adjusting the TX equalizer settings, press F5
[COPY] on the TX Equalizer Adjustment screen.
4 Press F2 [USER1], F3 [USER2] or F4 [USER3] to
specify the destination for saving the settings.
• Copying of the TX equalizer settings is complete and the
display returns to the TX Equalizer screen.
• Pressing F7 [CANCEL] returns the display to the TX
Equalizer screen without copying the settings.
5 Press and hold F [TX EQ] or press [ESC] to end the
process.

Saving the TX Equalizer Settings

The steps to write the TX equalizer settings data are as follows.
• Before doing so, configure the destination for saving the data in
"File Storage Location" of the
(11-2) to "Internal Memory" or "USB Flash Drive".
• To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into
1 Press and hold F [TX EQ] to display the TX Equalizer
screen.
2 Press F2 [ ]/ F3 [
control to select a characteristic.
.
3 Press F7 [SAVE].
A message indicating that saving is complete is displayed.
.
4 Press F4 [OK].
5 Press and hold F [TX EQ] or press [ESC] to end the
process.
The saved file is named in the "yyyymmdd_hhmmss"
●
format. The extension of the saved file is "equ".
(Example) If the date is 10:20:30 a.m., February 15, 2018:
20180215_102030.equ
The name of the destination folder is as follows. (The name
●
varies depending on the destination for saving files.)
USB flash drive: "KENWOOD\TS-890\SETTINGS\RX_EQ"
Built-in memory: "SETTINGS\RX_EQ"
When removing the USB flash drive, make sure to execute
●
"Safely Removing the USB Flash
"USB/File Management Menu"
(USB-A).
] or turn the [MULTI/CH]
Drive" (11-6).
TRANSMIT FUNCTIONS 8

Reading the TX Equalizer Settings

The steps to read the TX equalizer settings that are saved in the
internal memory or USB flash drive are as follows.
• To read data from a USB flash drive, insert the USB flash drive
containing the TX equalizer data into
1 Press and hold F [TX EQ] to display the TX Equalizer
screen.
2 Press F2[ ] / F3[
CH] control to select an equalizer characteristic to
read.
.
3 Press F6 [READ] to display the File (TX EQ.) screen.
• The File (TX Equalizer) screen appears.
. • To read data from the internal memory, press F7 [INT.MEM].
• To read data from the USB flash drive, press F7
[USB.MEM].
• Pressing F1 [ ] exits data file selection and returns the
display to the TX Equalizer screen.
• Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
• Pressing F5 [NAME] allows the file name to be changed.
4 Press F2 [ ]/ F3 [
control to select a file.
5 Press F4 [OK] to read the settings data.
• A "reading" message appears while reading is in progress,
which changes to a "reading complete" message when
reading is complete.
6 Press F4 [OK].
7 Press and hold F [TX EQ] or press [ESC] to end the
process.
When removing the USB flash drive, make sure to execute
●
"Safely Removing the USB Flash
The settings data read will be overwritten even if the
●
equalizer type of the setting application destination
selected in step 2 varies from the equalizer type of the
setting application source selected in step 3.
(USB-A).
] or turn the [MULTI/
] or turn the [MULTI/CH]
Drive" (11-6).
8-7