Editing User Information; Deleting A User; Remote Operation By Registered User; Session Time - Kenwood TS-890S Instruction Manual

15 NETWORK/KNS OPERATION

Editing User Information

1 Press F7 [U.LIST] to display the KNS Users List
screen.
2 Press F2[
]/ F3[
3 Press F4 [EDIT] to display the user registration
screen.
Follow the same steps for registering a new user to edit the user
information.

Deleting a User

1 Press F7 [U.LIST] to display the KNS Users List
screen.
2 Press F2[
]/ F3[
3 Press and hold F5 [(DELETE)].
Information registered for the selected user is deleted, and all
users below are shifted upward to replace the deleted row.
Information that is altered or deleted will take effect at the
●
next login.

Remote Operation by Registered User

A registered user may be authorized by the administrator to
remotely operate the transceiver using KNS.
1 Select KNS Menu [9] "Registered Users' Remote
Operation".
2 Press F4 [SELECT].
3 Press F2 [–]/ F3 [+] to select "On" or "Off".
On: Authorizes login by a registered user. However, this
excludes users for which the "Disabled" checkbox is selected
in the user information.
Off: Prohibits login by a registered user. Only the administrator
is allowed to log in in this setting.
• << >> lights up when a registered user is logged in.
• When someone is already logged in, another remote user
(regardless of an administrator or registered user) cannot
log in.
• If connection is lost while the transceiver is in the TX mode,
the transmission ends automatically.
15-6
] to select the user to edit.
] to select the user to delete.

Session Time

The maximum duration for a registered user to log in and use the
transceiver can be configured as follows.
1 Select KNS Menu [10] "Session Time".
2 Press F4 [SELECT].
3 Press F2 [–]/ F3 [+] to select a time.
1 [min]/ 2 [min]/ 3 [min]/ 5 [min]/ 10 [min]/ 15
Setting Value [min]/ 20 [min]/ 30 [min]/ 40 [min]/ 50 [min]/ 60
[min]/ 90 [min]/ 120 [min]/ Unlimited (default)
There is no time restriction when the administrator is
●
logged in.
The altered settings of the information will take effect at
●
the next login.

KNS Welcome Message

A text message notification for the remote user can be written to
the transceiver in advance and displayed on the ARCP-890 used
by the remote user.
A text message notification from a remote user to other remote
users can be written to the transceiver via remote operation.
1 Select KNS Menu [11] "KNS Welcome Message".
2 Press F4 [EDIT].
3 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a character string.
Key
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5
Moves the cursor.
[ ]
F [BACK SPACE] Deletes the character to the left of the cursor.
F [DEL] Deletes the character to the right of the cursor.
Switches the type of character to edit. Pressing
the key each time switches the selection in the
F [CHAR] following sequence:
ABC (upper case) → !"# (symbols) → ABC
(upper case)
4 Press F6 [SAVE] to save the message.
This message can be rewritten by the administrator or a
●
registered user via command access.
Behavior