Kenwood TS-890S Instruction Manual page 137

Pressing "VOICE1" outputs an announcement as follows. The content of the announcement varies with the screen that is being displayed.
Announcements Related to Operating Frequency (Including Content of Auto Announcements)
Screen
VFO mode
*4
Memory channel mode *4
Quick memory channel
mode
*4
During frequency entry
During entry of memory
channel no.
When configuring the split
frequency
Announcements during Display of Configuration Screens (Including Content of Auto Announcements)
Screen
Auto mode
AGC settings
Equalizer
Equalizer adjustment
Confirmation of equalizer
copy
Operation/Status
Simplex mode
Split mode
Blank channel
Simplex mode
Split mode
Simplex mode
Split mode
Before numeric keypad input
Input in progress
During confirmation
When entry is canceled
When entry history is selected
During 1-digit input
During 2-digit input
Pressing and holding SPLIT
When [0] is first pressed
When the numeric keypad ([1]
to [9]) is operated
Operation/Status
Screen launch
When [VOICE1] is pressed
When a selection is made
When frequency is copied to the
list
Switching between ON/OFF
When screen is displayed or
when [VOICE1] is pressed
When value is changed
When AGC speed is switched
AGC OFF
When screen is displayed or
when [VOICE1] is pressed
When a selection is made via
key operation
When screen is displayed or
when [VOICE1] is pressed
When a selection is made
When value is changed via key
operation
Initialization
When screen is displayed or
when [VOICE1] is pressed
Content of Announcement
[A/ B] Frequency + ([X/ R/ XR] + RIT/XIT Frequency)
*1
"Split" + [A/ B] Frequency + ([X/ R/ XR] + RIT/XIT Frequency)
*1
"Channel" + Number + "Blank"
"Channel" + Number + Frequency + ([X/ R/ XR] + RIT/XIT Frequency)
"Channel" + Number + Frequency + ([X/ R/ XR] + RIT/XIT Frequency)
"Quick" + Number + [A/ B] + Frequency + ([X/ R/ XR] + RIT/XIT Frequency)
"Quick" + Number + "Split" + [A/ B]
Enter
The numeric value that is most recently input ("Point" is also uttered after announcing
the MHz digits. A pause is inserted for the kHz digit.)
[A/ B] + Frequency
No announcement
Frequency entry history
"Enter" + Number
1st digit + 2nd digit + [Frequency/Blank]
"Split" + "Enter"
"Minus"
"TX" + [Plus/ Minus] * + Numeric value that is entered + "Kilohertz"
* Pressing the keys from [1] to [9] adds a "Plus" utterance, while pressing [0] + ([1] to
[9]) adds a "Minus" utterance.
Content of Announcement
"Auto" + Frequency at the top of the list + Mode
"Auto" + Frequency
Selected frequency + Mode
*3
"Copy" + Copied frequency + Mode
"Auto" + [On/ Off]
"AGC" + [Fast/ Middle/ Slow/ Off] (+ Value)
Value
[Fast/ Middle/ Slow] + Value
"AGC" + "Off"
[RX/TX] + "Equalizer" + (HB1/ HB2/ FP/ BB1/ BB2/ F/ C/ U1/ U2/ U3)
[HB1/ HB2/ FP/ BB1/ BB2/ F/ C/ U1/ U2/ U3]
[RX/TX] + "Equalizer" + "Adjustment"
[0/0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4/2.7/3.0/3.3/3.6/3.9/4.2/4.5/4.8/5.1] (+ [+/-]) + Value +
dB ([+/-] is not uttered when it is 0 dB.)
(+/-) + Value + dB ([+/-] is not uttered when it is 0 dB)
No announcement
"Copy" + "Are you Sure?"
VOICE GUIDANCE 13
*2
*2
*1 Frequency + ([X/ R/ XR] + RIT/XIT Frequency)
*3
*3
*2
*2
*2
*2
13-3