Changing The Name Of Files Stored In The Built-In Memory; Copying Files To A Pc - Kenwood TS-890S Instruction Manual

11 USB/FILE MANAGEMENT
Changing the Name of Files Stored in the Built-in
Memory
The file name of the settings data that is stored on the transceiver
can be changed by the user to ease identification.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3 Press F2 [
]/ F3 [
Configuration Data".
4 Press F4 [SELECT] to display the screen for
selecting the file (DATA) to read.
.
5 Press F5 [NAME].
The file name edit screen is displayed.
6 Use the function keys and the [MULTI/CH] control
to edit the file name.
• Enter a name that contains not more than 255 characters.
Key
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5
Moves the cursor.
[ ]
F [BACK SPACE] Deletes the character to the left of the cursor.
F [DEL] Deletes the character to the right of the cursor.
Switches the type of character to edit. Pressing
the key each time switches the selection in the
F [CHAR] following sequence:
ABC (upper case) → abc (lower case) → !"#
(symbols) → ABC (upper case)
7 Press F6 [SAVE] to save the file name.
• Pressing F7 [CANCEL] discards the edited information and
returns the display to the USB/File Management menu
screen.
8 Press [ESC] to end the process.
11-4
] to select "Read
Operation

Copying Files to a PC

Files that are stored in the built-in memory of this transceiver can
be copied to a PC.
• Connect the USB-B connector on the rear panel of this
transceiver to a PC using a commercially available USB cable.
(See 1-4)
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3 Press F2 [
]/ F3 [
(via USB Cable)".
4 Press F4 [SELECT].
A screen for selecting the files to copy is displayed.
.
5 Press F2 [
]/ F3 [
control to select the items to copy.
6 Press F5 [ ] to select the checkbox to the left
of the settings data name.
• Pressing F5 [
are not copied.)
• Pressing F6 [CLR.ALL] deselects all the checkboxes.
• Select at least 1 item to copy from the following.
Display
Configuration Files
Audio Files (RX_REC)
Audio Files (TIMER_REC)
Equalizer Files (TX_EQ)
Equalizer Files (RX_EQ)
Communication Log Files (CW)
Communication Log Files (FSK)
Communication Log Files (PSK)
Screen Captured Files
KNS Log Files
7 Press F4 [OK].
A screen indicating "preparing to copy" is displayed. A
"confirmation tone" is output once the copy preparation is
completed and a "PC on copy standby screen" is displayed.
Then, a removable device with the name "TS-890" appears on
the PC.
] to select "Copy Files to PC
] or turn the [MULTI/CH]
] again deselects the checkbox. (Files
Description
Settings data file
Audio files of manual and full-time
recordings
Audio files of timer recordings
TX equalizer data files
RX equalizer data files
CW communication log files
RTTY communication log files
PSK communication log files
Screen capture image files
KNS communication log files