19 OTHERS
Optional Accessories
ARCP-890........ Radio Control Program (Freeware)
ARHP-890........ Radio Host Program (Freeware)
ARVP-10.......... VoIP Program (Freeware)
ARUA-10..........USB Audio Controller (Freeware)
SP-890............. External Speaker
YG-82CN-1...... 270 Hz CW Filter
HS-5.................Open-air Headphones
HS-6.................Light Weight Headphones
MC-43S............Hand Microphone
MC-60A............Desk-top Microphone
MC-90.............. Desk-top Microphone
PS-60............... Regulated DC Power Supply (22.5 A)
The ARCP-890 Radio Control Program, ARHP-890
●
Radio Host Program, ARVP-10 VoIP Program and
ARUA-10 USB Audio Controller can be downloaded
from the following website.
https://www.kenwood.com/i/products/info/amateur/
software_download.html
Optional accessories that can be used along with this
●
transceiver may from time to time be added or
discontinued.
Refer to the catalog for details of the optional
accessories.
Installing the YG-82CN-1 Roofing Filter
1 Remove the bottom case.
.
2 Remove the shield plate of the TXRX unit.
.
3 Insert YG-82CN-1 into the socket.
.
Bottom Case
.
4 Stick the cushion that is supplied with YG-82CN-1
Shield Plate
5 Install the shield plate of the TX/RX unit and the
• There is a supplied filter on the board panel and the 3
sockets for YG-82CN-1 are located just in front of it.
• Align the direction of the supplied filter with that of the
KENWOOD logo (
mark at the top left) and insert the pins
at the bottom of the YG-82CN-1 board into the sockets.
• Align the pins at the bottom of the YG-82CN-1 board with
the sockets and insert YG-82CN-1.
To remove YG-82CN-1, hold the YG-82CN-1 board at
●
the two sides and pull it out.
on the shield plate of the TX/RX unit.
Stick the cushion at the location indicated by the guide on the
back of the shield plate.
Cushion
.
bottom case.
OTHERS 19
19-1