Deleting Files (Built-In Memory); Formatting A Usb Flash Drive; Copying Files To A Usb Flash Drive - Kenwood TS-890S Instruction Manual

When the built-in memory is selected as the destination
●
for saving files and while manual recording or CW/RTTY/
PSK communication log recording is in progress,
selecting a file to copy followed by pressing F4 [OK] will
result in an error and an "unable to copy" message will
be displayed.
Pressing F7 [CANCEL] while the "preparing to copy"
●
screen is displayed starts the cancel copy operation.
When the cancel copy operation is complete, the display
returns to the USB/File Management menu screen.
After the "preparing to copy" screen is displayed, a
●
"confirmation tone" is output once the copy preparation
is completed and a copy standby screen is displayed on
the PC. Then, a removable device with the name
"TS-890" appears on the PC.
When a remote user is logged in via the KNS function
●
and the communication log is set to ON, selecting "KNS
Log Files" and pressing F4 [OK] will result in an error and
an "unable to copy" message will be displayed.
8 Access the removable device named "TS-890" from
the PC and copy the files or folders to the PC.
9 After copy is complete, remove the removable
device ("TS-890") safely from the PC.
The files may not be copied successfully if the proper
●
steps to remove the device safely from the PC are not
observed.
10 Press F4 [EXIT].
A confirmation screen on the batch deletion of files is displayed.
Items for which the checkboxes are selected on the screen for
selecting the files to copy can be deleted from the built-in
memory.
• Pressing and holding F4 [(DELETE)] executes the file
deletion operation.
• Pressing F7 [KEEP] leaves the files intact and returns the
display to the USB/File Management menu screen.
11 Press [ESC] to end the process.

Deleting Files (Built-in Memory)

Follow the steps below to delete settings data or audio data from
the built-in memory. Deletion will apply to the function folders that
contain the corresponding files.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3 Press F2 [
]/ F3 [
(Internal Memory)".
4 Press F4 [SELECT].
A screen for selecting the files to delete is displayed.
.
] to select "Delete Files
USB/FILE MANAGEMENT 11
5 Press F2 [
]/ F3 [
control to select the items to delete.
6 Press F5 [
] to select the checkbox to the left
of the settings data name.
• Pressing F5 [
are not deleted.)
• Pressing F6 [CLR.ALL] deselects all the checkboxes.
• Select at least 1 item to delete.
• Pressing F7 [CANCEL] returns the display to the USB/File
Management menu screen.
7 Press F4 [OK].
A file deletion confirmation screen is displayed.
8 Press F4 [OK].
File deletion starts.
• Pressing F7 [CANCEL] returns the display to the file
deletion confirmation screen without deleting the files.
9 Press [ESC] to end the process.
When the built-in memory is selected as the destination
●
for saving files and the item to be deleted coincides with
an item for which manual recording or CW/RTTY/PSK
communication log recording is in progress, pressing F4
[OK] will result in an error and an "unable to delete"
message will be displayed.
When a remote user is logged in via the KNS function
●
and the communication log is set to ON, selecting "KNS
Log Files" as an item to delete and pressing F4 [OK] will
result in an error and an "unable to delete" message will
be displayed.

Formatting a USB Flash Drive

The USB flash drive needs to be formatted by this transceiver
before it can be used. USB flash drives cannot be recognized if
they are not formatted by this transceiver.
Formatting a USB flash drive using this transceiver
●
erases all data that exist in the USB flash drive. As such,
make sure to save the necessary data to a PC or other
external data storage devices before deleting.
1 Insert the USB flash drive into the
connector.
<< >> starts to blink and lights up when the USB flash drive
is recognized by this transceiver.
2 Select "Format USB Flash Drive" in the USB/File
Management menu.
3 Press F4 [SELECT] to start formatting.
• A message to confirm the start of the formatting process is
displayed.
• Pressing F7 [CANCEL] ends the operation without
formatting the USB flash drive.
4 Press F4 [OK].
When formatting is complete, the display returns to the USB/
File Management menu screen.

Copying Files to a USB Flash Drive

Files that are stored in the built-in memory of this transceiver can
be copied to a USB flash drive.
• Insert a USB flash drive formatted using this transceiver into
(USB-A).
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
] or turn the [MULTI/CH]
] again deselects the checkbox. (Files
(USB-A)
11-5