Using The Sd (Secure Digital) Card; Locking And Unlocking; Formatting The Sd Card - GE MAC 600 Operator's Manual

Resting ecg analysis system
Table of Contents

Advertisement

4.
Select one or more ECGs.
5.
Select Save PDF.
The resulting PDF file(s) will be stored on to the SD card in the PDF folder.

Using the SD (Secure Digital) Card

GE Healthcare recommends using a 2 GB SanDisk or Transcend SD card.
NOTE:
Use an SD card exclusively to store ECGs. Do not use this SD card for any other purpose.
The SD card should be formatted for FAT16 file system. Perform regular backups by copying
the entire content present on the SD card.
NOTE:
The ECG files stored in SD card are encrypted except XML and PDF file. SD card used in a
specific device can not be used in another MAC600 device.

Locking and Unlocking

To prevent accidental deletion of data, protect the SD card by moving the lock panel to the locked
position. Move the lock panel back to the unlocked position to store data to the SD card or to
delete data from the SD card.

Formatting the SD Card

Most SD cards do not require formatting. If an unformatted SD card is used with the system, the
following message will be displayed:
"This SD Card cannot be read and requires formatting. Formatting will destroy all data on this
SD Card. Are you sure you want to format?"
Select Yes to format the SD card.
2047426-001K
MAC™ 600
File Manager
89

Advertisement

Table of Contents
loading

Table of Contents