Configuring Auto Transmit - GE MAC 600 Operator's Manual

Acquiring an ECG
5.
In PDF File Name Configuration, select the tpe of configuration.
For more information, see
6.
Select Return.
NOTE:
The PDF reports can be transferred from an SD card to a computer and then can be printed like
any PDF document.
ECG prints from stored ECG reports are not of diagnostic quality and should be used
for reference only.
Be aware of the following scenarios for printing of the PDF report from the computer:
The printed PDF report may not be to scale, since there can be settings in the
l
printer to auto scale the contents to fit the paper size.
To print the PDF report to scale, disable auto scale settings in the printer and ensure
l
the paper type selected is A4.
When the PDF report is printed to scale, some details on the margins of the report
l
may not print depending on the printer used.

Configuring Auto Transmit

Perform the following procedure to configure the device to auto transmit an acquired ECG.
1.
Within the system setup function, select Transmission.
2.
In Auto ECG Transmission, select the type of transmitted ECGs.
3.
In Serial line baud rate, select a baud rate.
72
"PDF Configuration" on page
MAC™ 600
118.
2047426-001K