Writer Setup; Ecg Analysis - GE MAC 600 Operator's Manual

System Setup

Writer Setup

With Writer Setup highlighted, press the Enter key. The Writer Setup window opens.
The Writer Setup window setup options are defined in the following table.
Function
Speed 1
Gain 1
Filter 1
Paper
1 The setting is valid for PDF formats too.

ECG Analysis

With ECG Analysis highlighted, press the Enter key. The ECG Analysis window opens.
The ECG Analysis window setup options are defined in the following table.
Function
Preview before print
Screening criteria
Reason Statements
98
Description
Select the writer's speed setting in millimeters per second. The
default is 25 mm/s.
Select the writer's gain setting. The default is 10 mm/mV.
Select the writer's filter setting. The default is 150 Hz.
Select the kind of paper, Z-Fold/Roll. The default is Z-Fold.
Description
Displays acquired 10 second ECG and 12SL analysis. The default
is Yes.
Select Yes to prevent specific 12SL analysis statements from
appearing in the reports. The default is
on page 141.for a list of these statements.
Select Yes to enable the inclusion of reason statements in the
report. The default is No.
MAC™ 600
No.See "12SL Statements"
2047426-001K