Maintenance
Charging the Battery
To fully charge the system battery:
1.
Connect the system to an AC wall outlet.
2.
Charge the system's battery 2–3 hours or until the battery LED switches off.
NOTE:
Is the Battery Charging?
The following are indications show that your device is being charged.
the amber battery light glows
l
the battery gauge icon shows the battery charging icon
l
NOTE:
If the battery is fully charged or exceeds safe charging temperature, the system will not
charge the battery.
When Should You Charge the Battery?
Before Initial Use
l
To ensure a fully charged battery, charge the system before you use it for the first time.
Between Acquisitions
l
To ensure a fully charged battery, power off the system and connect it to an AC wall outlet until
you use the system again. This prolongs battery runtime.
When the Battery is Low
l
The amber light on the keypad flashes intermittently.
When the Battery is Completely Discharged
l
Your system powers off when the battery is completely discharged. To operate your system, you
must connect the system to an AC wall outlet.
134
If the battery is deeply discharged, you may have to charge the battery for 6 to 7 hours.
MAC™ 600
2047426-001K